|
|
Acrylic signs are made of an extremely versatile plastic sheet with a glossy finish, which is also known as Plexiglas®. Acrylic is the perfect choice when you want signs with a sophisticated, high-tech look. Highly durable and available in a variety of colors, acrylic is often used for illuminated, architectural, tradeshow and point-of-purchase signs.
This plastic product can be heated to form many shapes. Use it to create:
-
Boxes
-
Brochure holders
-
Signs and easels, all-in-one
-
Point-of-purchase products
-
Menu boards
-
Tradeshow exhibits
-
Retail signs
-
Restaurant signs
-
Nameplates and name badges
-
Directional and informational signs
-
Showroom signs
-
Office building signs
Increase the visual effectiveness of your acrylic signs by:
-
Adding stripes and borders
-
Applying multiple lettering colors
-
Incorporating a logo or graphic symbol
-
Using multiple layers of acrylic to enhance the image
-
Creating a three-dimensional effect—giving the perception of depth to the finished product—using clear acrylic and applying a background color to the reverse side
-
Designing custom applications
-
Using bent easels
-
Using non-glare acrylic to reduce glare problems
Acrylic signs may be displayed in several ways:
-
Self-supporting (bent easel)
-
Hanging
-
Using Velcro®
-
Gluing
-
Using double-sided tape
-
Applying suction cups
-
Do not leave acrylic in direct sun or in a hot car; it may bow or bend if not laying flat
-
Handle acrylic signs with care because acrylic scratches easily and can shatter or chip upon impact
-
Use acrylic signs for long-term indoor use or for short-term outdoor use in areas protected by overhangs or awnings. (This does not apply to acrylic used in light box signs)
Sign products and materials may vary by location. Contact your local FASTSIGNS® center for more information on product availability.
Lightweight, yet sturdy, aluminum is a great choice for outdoor signs. It comes in a variety of colors, and with a baked enamel finish, is highly durable, weathering the elements without rusting.
-
Pool and spa rules
-
Real estate signs
-
Parking garage signs
-
Service signs
-
Directional and informational signs
-
Building signs
-
Traffic and regulatory signs
Increase the effectiveness of your aluminum signs by:
-
Adding stripes and borders
-
Using additional lettering colors
-
Adding a logo or graphic symbol
-
Designing custom applications
-
Using frames or stakes
Aluminum signs may be displayed in several ways:
-
Framed and staked
-
Glued to walls
-
Riveted or bolted to walls
-
Wired to fencing
Be careful when installing your aluminum sign (or have FASTSIGNS® install it for you). While the baked enamel finish is resistant to weather, it is brittle and scratches easily.
Sign products and materials may vary by location. Contact your local FASTSIGNS® center for more information on product availability.
Rely on FASTSIGNS® durable vinyl banners and nylon-reinforced vinyl banners for your promotions, special events, grand openings and sporting events. Highly weather resistant, our vinyl banner material works well indoors for short- and long-term installations and outdoors for temporary purposes. Because of the material's strength, it can be cut into almost any length or dimension. Banner material is available in many colors to meet your needs. Vinyl signs are also weather resistant and durable.
-
Choose the nylon woven and vinyl banner material stocked by most FASTSIGNS® centers for durable, long-lasting banners. Although there are other banner materials, such as Tyvek and polyethylene, few last as long as vinyl and nylon woven material
-
Consider using a heavier weight material when your banner will be suspended between poles or buildings
-
Plan to apply letters to one side of your banner only. Our standard, stocked banner material is guaranteed to be vinyl-receptive on one side. If the sign is hung outside, letters on the second side may come off quickly. If letters are applied to the proper side, though, the banner will be more durable outdoors
-
Grand Opening and Coming Soon announcements
-
Sales and promotions
-
Special events
-
Sporting events
-
Tradeshows and Exhibits
Increase the effectiveness of your banners by:
-
Making banners large
-
Adding stripes and borders
-
Using additional lettering colors
-
Adding a photo, logo or graphic symbol
-
Utilizing unusual shapes or designs
The maximum banner size is virtually unlimited, and we can create customized banners in any size you want or need.
FASTSIGNS® offers many options for finishing and mounting your banners:
-
Grommets—Attach banners at regular points to distribute their weight evenly and prevent sagging
-
Pole Pockets—Insert rigid poles into pockets along your banners’ edges for a more even weight distribution. This can prevent sagging and make your banners more rigid
-
Hemmed Edges—Reinforce the sides of your vinyl banners to maintain their shape and prevent stretching
-
Power Tape—Reinforce the edges of your shear-cut banners or banners that have no material available for hemmed edges
-
Banner-Ups—Attach plastic tabs with eyelets to each corner of your banners to create convenient hanging points
-
D-rings with Nylon Webbing*—Secure large banners that will hang on buildings with D-rings and ratchet straps
-
Nylon Webbing*—Reinforce the tops and bottoms of your banners to extend their lives—especially if you’re in an area that is prone to high winds
* Extra time required.
-
In production, grommets will be placed in all four corners and every 2-3’ feet between, across the top and bottom. These are used to hang and secure the banner while minimizing stress. The two-ply corners ensure strength for intermediate to long-term outdoor life
-
Special care needs to be given to the installation of large banners. If you are unsure of the best application method, call your local FASTSIGNS® center
-
When storing your banner, roll the banner with the graphics or letters to the outside to prevent letter separation and air bubbles. Never fold your banner because it will cause it to have creases
-
Proper care and handling will improve the longevity of your banner
Banner Installation and Care (PDF)
Sign products and materials may vary by location. Contact your local FASTSIGNS® center for more information on product availability.
Corrugated plastic, also known by the brand name Coroplast®, is a versatile, extruded twin-wall plastic sheet that comes in a variety of colors. Lightweight and cost-effective, it is ideal for a wide variety of indoor and short-term outdoor uses.
-
Use corrugated plastic as a substitute for poster board or card stock for interior applications. Its surface is not affected by most oils, solvents or water, and cleans easily
-
Cut through the first corrugation to create A-frame signs or table tents. The cut will also enable you to fold the sign and carry it in a briefcase or suitcase
-
You may notice faint horizontal lines when you look at corrugated plastic. It is aligned with flutes that generally run horizontally across the width of the sign
-
Menu boards
-
Special event signage
-
Directional and informational signs
-
Indoor point-of-purchase signs
-
Temporary and promotional signage
-
Tradeshows
Increase the effectiveness of your corrugated plastic signs by:
-
Using stripes, borders and additional lettering colors
-
Adding a logo or graphic symbol
-
Using frames or stakes, or displaying on an easel
Corrugated plastic signs may be displayed in several ways:
-
Hanging
-
Self-supporting (with an easel)
-
Applying suction cups
-
Using double-sided tape or Velcro®
-
Framing and staking
Sign products and materials may vary by location. Contact your local FASTSIGNS® center for more information on product availability.
Expanded PVC (polyvinyl chloride), also known as foam PVC, Trovicel® and Sintra®, helps you project a high-quality, professional image. Medium-weight and durable, expanded PVC can be installed and transported easily and is great for long-term indoor or short-term outdoor use. It is available in a variety of colors, and its matte finish reduces glare, hides fingerprints and can be cut easily into shapes, so you can create custom applications.
-
Point-of-purchase displays
-
Menu boards
-
Directional and informational signs
-
Name plates and name tags
-
Tradeshow signage
Increase the effectiveness of your PVC signs by:
-
Adding striping and/or borders
-
Using bent easels
-
Adding lettering colors
-
Using a logo
-
Incorporating a graphic symbol
-
Cutting into unusual shapes or designs
PVC signs may be displayed in several ways:
-
Self-supporting (bent easel)
-
Hanging
-
Applying suction cups
-
Using double-sided tape or Velcro®
-
Framing
-
Do not leave PVC signs inside your car. Expanded PVC tends to warp when exposed to heat or sunlight for extended periods of time
-
Install PVC in sheltered, low-humidity areas when possible. It may absorb moisture and mildew when left in exposed outdoor locations
-
Without proper handling, PVC can be scratched
Sign products and materials may vary by location. Contact your local FASTSIGNS® center for more information on product availability.
Corrugated signs are lightweight and cost-effective visual communications solution, ideally suited for a wide variety of indoor and short-term outdoor uses. Also known by the brand names Coroplast®, Corex, Corflute and Plasticor; corrugated plastic is an extremely versatile, extruded twin-wall polypropylene sheet.
-
Menu boards
-
Special event signage
-
Directional and informational signs
-
Indoor point-of-purchase signs
-
Temporary and promotional signage
-
Tradeshows
Increase the effectiveness of your Corrugated signs by:
-
Using stripes, borders and lettering colors
-
Adding a logo or graphic symbol
-
Using frames or stakes, or displaying on an easel
Corrugated signs may be displayed in several ways:
-
Self-supporting (with a cardboard easel)
-
Suction Cups
-
Double-sided tape
-
Velcro
-
Framed and/or staked
-
Squeegee in the direction of the corrugations when cleaning
-
Do not leave corrugated signs in direct sun or in a hot car; they may bow or bend if not laying flat
Sign products and materials may vary by location. Contact your local FASTSIGNS® center for more information on product availability.
Metal Signs
Metal signs are sturdy and weather-resistant, making them a great choice for outdoor use. A baked enamel finish gets your message out in an attractive and durable format.
Metal Sign Applications
-
Pool and spa rules
-
Real estate signs
-
Parking garage signs
-
Service signs
-
Directional and informational signs
-
Building signs
-
Traffic and regulatory signs
Metal Sign Ideas
Increase the effectiveness of your metal signs by:
-
Adding stribes and borders
-
using addional lettering colors
-
Adding a logo or graphic symbol
-
Designing custom applications
-
Using frames or stakes, or displaying on an easel
Installation
Metal signs may be displayed in several ways:
-
Framed and staked
-
Glued to walls
-
Riveted or bolted to walls
-
Wired to fencing
Care
Use care when installing your metal sign (or have FASTSIGNS® install it for you). While the baked enamel finish is resistant to weather, it is brittle and scratches easily.
Sign products and materials may vary by location. Contact your local FASTSIGNS® center for more information on product availability.
|
|
