Grommets
Provide a convenient meth­ od for attaching the banner at regular points. This dis­tributes the banner's weight and helps to keep the ban­ner from sagging.

Grommets

Pole Pockets 
Pole Pockets allow for rigid poles to be inserted along the edges of the banner. This allows for a more even distribution of the banner's weight to prevent sagging. Opposing pole pockets can also be used to make the banner more rigid.

Pole Pockets

Hemmed Edges
Hemmed edges are typically used to reinforce the sides of vinyl banners, helping maintain the banner's shape and prevent stretching.

Hemmed Edges

Power Tape
Reinforces the edges of shear cut banners or banners that have no material available for hemmed edges.

Power Tape

Banner-Ups 
A plastic tab with eyelet attached to each corner of the banner. This creates convenient attachment points to hang a banner.

Banner-Ups

Additional Banner Finishing Options (Extra Time Required)

D-rings with Nylon Webbing 
D-rings with nylon webbing are typically sewn into large banners that will hang on buildings. The D-rings allow the banner to be secured with ratchet straps.

D-rigns with Nylon Webbing

Nylon Webbing 
Webbing sewn into the top and bottom makes the banner stronger and significantly extends banner life. Webbing is typically used in areas subjected to higher wind loads.

Nylon Webbing



Download Banner Finishing Options